CSC-18 Series

Features

15 HP Fanuc Servo Spindle motor
Rigid Meehanite castings with extra ribbing
Induction hardened and ground ways Gearbox with alloy steel gears that are hardened and ground
Extra large precision ground ballscrews
40-4000 RPM range; MPG electronic handwheels
Auto Lube system with metered Check valves
Automatic 4 position electric tool post

Specification	CNL-1740	CSC-18 Series	CHL-21 Series
Swing Over Bed	17"	18"	20.98"
Swing Over Cross Slide	10-7/8"	10"	11.8"
Distance Between Centers	37"	38" / 57"	40" / 60" / 80" / 120"
Width of Bed	12"	12"	13.58"
Spindle Nose	Camlock D1-6 (Opt. ASA A1-6)	ASA A2-6	D1-8 or ASA A2-8
Spindle Bore	2.066"	2.56"	3.149"
Spindle Taper	M.T. #6	M.T. #6 w/ sleeves	M.T. #5
Spindle Speeds	30-2500 RPM	40-4000 RPM	20-2000 RPM
Longitudinal Travel (Z-Axis)	33.5" / 55.1"	33.5" / 53"	28.3" / 107.1"
Cross Slide Travel (X-Axis)	9.05"	9.05"	11.8"
Z-Axis Ballscrew Diameter	1-5/16", 10 mm pitch	1-5/16", 10 mm pitch	1.97", 10 mm pitch / 2.48", 10 mm pitch
X-Axis Ballscrew Diameter	0.787”, 5 mm pitch	2”, 5 mm pitch	0.98", 5 mm pitch
Z-Axis Rapid Traverse Speed	300"/min	393"/min	394"/min
X-Axis Rapid Traverse Speed	200"/min	295"/min	295"/min
Tailstock Quill Diameter	2.677"	2.677"	3.346"
Tailstock Quill Travel	6"	6"	7"
Tailstock Taper	M.T. #4	M.T. #4	M.T. #5
Spindle Motor	10 HP	15 HP	15 HP
AC Servo Motor (Z-Axis)	2 HP	3.8 HP	2.7 HP
AC Servo Motor (X-Axis)	1.3 HP	1.3 HP	1.8 HP
Net Weight	4410 LBS	5170 LBS / 5720 LBS	8929 LBS / 11684 LBS
Gross Weight	5510 LBS	6300 LBS / 6840 LBS	9810 LBS / 13228 LBS
Packing Dimension	105" x 80" x 90"	112.6" x 83.3" x 92" / 132.3" x 83.3" x 92"	126" x 90.6" x 88" / 204.7" x 90.6" x 88"

Title: Kent USA CNC Manual Teachable Precision Lathe (Email)