RML-1440VT

Features

  • 5 HP main spindle motor using frequency drive and capable of running using single phase power
  • Digital display 20–400-2500 infinitely variable spindle speeds
  • Hardened and ground gears and bedways
  • Cast iron machine bedways with full one piece cast base and front loading chip tray for easier cleaning
  • Foot brake and T-Slot compound Inch/metric reading on dials
  • Inch/metric ruler on tailstock quill
  • ISO 9001 certified manufacturer

   

Specifications

Specification TRL-1340/VRML-1440VTRML-1640T
Swing Over Bed 13-3/8" 14-3/16" 16-3/16"
Swing Over Cross Slide 8-1/4" 8-3/8" 10-3/8"
Swing Over Gap 20" 21" 23"
Width of Bed 9” 10-1/4" 10-1/4"
Distance Between Centers 40" 40" 40"
Cross Slide Travel 7" 8-11/16" 8-11/16"
Top Slide Travel 4" 5-1/2" 5-1/2"
Spindle Bore 1.5" 2.1" 2.1"
Spindle Speeds 16 2 12
Spindle Speed Range 50-2570 RPM 20-400-2500 RPM 36-1800 rpm
Through Hole Diameter 1-9/16" 2-1/16" 2-1/16"
Spindle Nose ASA D1-4 Camlock D1-6 Camlock D1-6 Camlock
Spindle Bore Taper MT#5 MT#6 MT#6
Thread – Standard (Whit-worth) 45 (2-72) TPI 45 (2-72) TPI 45 (2-72) TPI
Thread – Metric Pitch 39 (0.2-14) mm 39 (0.2-14) mm 39 (0.2-14) mm
Longitudinal Feed 0.002"–0.067" 0.002"–0.067" 0.002"–0.067"
Cross Feed 0.001"–0.0375" 0.001”-0.034” in/rev 0.001”-0.034” in/rev
Lead Screw Diameter 1-1/8" 1-1/8" 1-1/8"
Threading Pitch 4 TPI 4 TPI 4 TPI
Quill Travel 4" 6.5" 6.5"
Quill Diameter 2" 2" 2"
Quill Bore Taper MT#3 MT#4 MT#4
Main Motor 5 HP 5 HP 5 HP
Coolant Pump Motor 1/8 HP 1/8 HP 1/8 HP
Machine Dimension 81.5" x 32" x 56" 81" x 36" x 60" 81" x 38" x 62"
Packing Dimension 90" x 37" x 60" 87" x 42" x 66" 87" x 42" x 66"
Machine weight 2200 LBS 3190 LBS 3520 LBS
Packing weight 2440 LBS 3630 LBS 3960 LBS

Accessories

Standard Accessories

  • 3-jaw chuck (9″)
  • Steady rest
  • Follow rest
  • 4-position tool post
  • Coolant system
  • Full-length splash guard
  • Worklight
  • Chuck cover
  • Thread chasing dial
  • Toolbox with standard tools

Optional Accessories

  • 4-jaw chuck (10″)
  • Digital Readout System (View Brochure)
  • Royal spindle type live center
  • BTC 3-jaw chuck with back plate
  • Taper turning attachment
  • Rustlick coolant
  • Micro carriage stop
  • Face plate (12″ D1-6)
  • Transformer for 440V power (5 KVA)

Brochures

Title: Kent USA Precision Lathes

Request for Info