Certified Pre-Owned Kent USA TPR-C2500 Radial Arm Drill
$108,950
$84,500
w/ limited 6 months parts warranty; in stock in Minnesota
Features
- 16 spindle speed and 16 feed rates
- Centralized single level control for forward and reversal of spindle
- Ultra low noise
- Light and handy to operate
- Safety overload
- Auxiliary dial for spindle feed depth
Specifications
| Diameter of column | 21.6″ | 550mm | A |
| Distance from column surface to spindle center,max | 98.4″ | 2500mm | D+C |
| Distance from column surface to spindle center, min | 19.6″ | 500mm | C |
| Travel of spindle head | 78.7″ | 2000mm | D-C |
| Distance from base surface to spindle end,max | 78.7″ | 2000mm | E |
| Distance from base surface to spindle end,min | 21.6″ | 550mm | F |
| Elevating height of arm | 43.3″ | 1100mm | E-F-I |
| Effective area of box table | 39″x31”x22” | 1000x800x560(mm) | LxKxH |
| Dimension of base | 138″x55″x12″ | 3500x1400x300(mm) | RxSxQ |
| Taper hole spindle | MT#6 | MT#6 | |
| Stroke of spindle | 18″ | 450mm | I |
| R.P.M of spindle | 16-1250rmp (12steps) | 16-1250rmp (12steps) | |
| Feed of spindle | 0.0016”-0.125”/rev (16 Steps) | 0.04mm-3.1mm/rev
(16 Steps) |
|
| Main motor | 10 H.P. | 7.5 KW | |
| Elevating motor | 5 H.P. | 3.75 KW | |
| Hydraulic clamping motor | 1 H.P. | 0.75 KW | |
| Coolant equipment | 1/4 HP | 0.18 KW | |
| Capacity | |||
| Drilling(steel/cast iron) | 3.15″/3.94″ | 80mm/100mm | |
| Tapping(steel/cast iron) | 2.56″/2.95″ | 65mm/75mm | |
| Machine height from floor | 157″ | 4000mm | M |
| Base+column height | 150″ | 3810mm | G |
| Net weight(approx) | 24200lbs | 11000 kg | |
| Shipping weight(approx) | 27500lbs | 12500kg | |
| Shipping dimensions(LxWxH) | 163″x74″x151″ | 415x188x385(cm) |
