WSi-200

Features

  • Machine structure designed and analyzed by CAE system for high structural rigidity.
  • U, V, Z axis strategically placed on upper column for enhanced spindle rigidity and precision.
  • Magnet power clutch wire-receiving systems.
  • ATW auto threading wire system
  • Permanent generator control system for wire tension stability
  • Accurate linear guide ways coupled with patented linear and block design

Kent USA EDM CNC Control

   

Specifications

Specification WSi-200WSi-430WSi-530
Max Work Piece Size 22” x 18.5” x 5.9” 27.6” x 21.3” x 11.6” 37” x 22.4” x 11.6”
Max Work Piece Weight 661 lbs 1102 lbs 2205 lbs
Drive & Servo 5 axes AC servo 5 axes AC servo 5 axes AC servo
Simulation Axis X / Y / U / V (4 axes) X / Y / U / V (4 axes) X / Y / U / V (4 axes)
X/Y-Axis Travel 8.27" / 7.87" 15.7” / 11.8” 19.7” / 11.8”
Z-Axis Travel 6.1" 11.8" 11.8"
U/V-Axis Travel 1.8” / 1.8” 3.93” / 3.93” 3.93” / 3.93”
Wire Diameter Range Ø 0.1~0.3 mm Ø 0.1~0.3 mm Ø 0.1~0.3 mm
Max Taper Angle ± 10° 2.4” ± 22.5° 3.93” ± 22.5° 3.93”
Max Axes Load 13.23 lbs 22 lbs 22 lbs
Conductivity Automatic Automatic Automatic
Water Tank Capacity 118.8 Gallons 150.6 Gallons 248 Gallons
Net Weight 3747 lbs 4629 lbs 7385 lbs
Dimensions 71” x 75” x 73” 118” x 86.6” x 84.6” 139.7 x 102.4” x 88.2”

Accessories

Optional Accessories

  • Diameter guide upper + lower (0.25 mm)
  • CAD/CAM Software
  • Water chiller
  • Power regulator / 15 kva
  • Parallel bar – for setting the work piece
  • Filter (2 pcs)
  • Resin / 5L
  • Brass Wire 0.25 mm / 3 kg
  • Power feed contact (2 pcs)
  • Water resistance meter
  • Wire tension meter
  • Wire speed meter
  • Water nozzle (upper/lower)(2 pcs) / 1 set
  • 22.5 degree water nozzle / set (upper/lower + diameter guide)

Brochures

Title: Kent USA Wire Cut EDM WFi and WSi Series-r

Videos

WSi Series Submerge Type EDM: Operation

Request for Info