KUG-2760H/NC

Features

Nitride hardened, super-finished spindle
Variable speed workhead rotates 90° CCW and 30° CW
Rapid advance and retract of wheel head allows for quicker setup and check of grind-in dimensions
Hydraulically driven longitudinal traversal
Manual infeed for H model; manual and automatic infeed with plunge cycle on NC model
Advanced Hydrostatic Lubrication System

Specification	KUG-2760H/NC
Max. Grinding Length	23.6"
Max. Work Swings	10.6"
Max. Load Between Centers	154 LBS
Max. External Grinding Diameter	Ø 9.8″
Grinding Wheel O.D. x Width x I.D.	16” x 1”-2” x 5”
Grinding Wheel Speeds (2 Range Pulley) RPM	1500 RPM, 1600 RPM
Workhead Spindle Swivel Angle	120°
Workhead Spindle Center Taper	M.T. #4
Workhead Spindle Spindle Rotation	Forward & Reverse
Workhead Spindle Speed Range	11-500 RPM
Tailstock Taper	M.T. #4
Table Swivel Angle	-11°, +6°
Table Traverse Speed	1.96"-157"/min
Worktable Min Travel	0.31"
Hand Wheel Feed/Revolution	0.79"
Wheel Spindle Motor	5 HP / 4 P
Workhead Spindle Motor	0.5 HP / 4 P
Hydraulic Pump Motor	2 HP / 4P
Wheel Spindle Lubrication Pump Motor	1/4 HP / 4 P
Coolant Pump Motor	1/4 HP / 4 P
Internal Grinding Spindle Motor	2 HP / 2 P
X Servo Motor	1.3 HP
Y Servo Motor	2 HP
Wheel Spindle Lubricant Tank	5.8 Gal.
Hydraulic Fluid Tank	15.9 Gal.
Coolant Tank	26.5 Gal.
Net Weight	6930 lbs
Packing Dimensions	110" x 65" x 72"

Title: KUG Series Cylindrical Grinders 2024 v2

Download