KGS-1020
Features
- 10”x20” working capacity
- Roller ball on linear table ways for easy and smooth longitudinal movements
- Precision hand scrapped turcite double V saddle ways for smooth and long lasting precision
- High column design with 21” spindle center to table for extra clearance under the wheel
- Safety Centralized one-shot lubrication system provides lubrication to all points
- 24V control circuit power
Specifications
| Specification | CGS-618M | CGS-818M | KGS-1020 |
|---|---|---|---|
| Working Capacity | 6" x 18" | 8" x 18" | 10" x 20" |
| Table Travel | 19" | 19" | 24.5" |
| Saddle Travel | 7.69" | 10.25” | 12.5" |
| T-Slot | 1 x 9/16" | 1 x 9/16” | 1 x 9/16” |
| Spindle Motor | 3 HP | 3 HP | 3 HP |
| Spindle Speed | 3450 RPM | 3450 RPM | 1750 RPM |
| Grinding Wheel | 8” x 3/4” x 1-1/4” | 8” x 3/4” x 1-1/4” | 12" x 1" x 3" |
| Vertical Graduation | 0.0002" (0.00005” on microfeed dial) | 0.0002” (0.00005” on microfeed dial) | 0.0005" |
| Vertical Revolution | 0.050" | 0.050" | 0.050" |
| Spindle to Table | 18" | 18" | 21" |
| Net Weight | 1600 lbs | 1650 LBS | 3256 LBS |
| Gross Weight | 1800 lbs | 1850 LBS | 3800 LBS |
Accessories
Standard Accessories
- Grinding wheel
- Wheel flange
- Wheel balancing base
- Wheel balancing arbor
- Diamond table dresser base and tip
- Leveling bolts and pads
- Work light
- Toolbox with tools
Optional Accessories
- Walker 10×20 LBP Electric Chuck w/ Control
- Walker 10×20 Ceramax Permanent Chuck
- Kanetsu 10×20 Fine Pole Electric Chuck & Control
- Magnetic Separator Coolant System
