FSG-51 Series
Features
- 25 HP Spindle Motor, 12-Speeds
- 9” Spindle Through Hole; Optional 16” and 21”
- Solid One Piece Full Length Casting Base and Bed with Double V Carriage Ways for Maximum Rigidity
- Mobile Full Length Rear Splash Guard allows for Easy Chip Removal
- Spindle Jog Button Control and Full Universal Gear Box
- Automatic Lubrication System for Bed Way and Cross Slide
- Heavy duty 2-speed Tail Stock with Large 1” Quill Diameter for MT#6 Mounting
- Optional Safety Interlocked Electric Cabinet and Chuck Cover
- Optional Rear Mounting Chuck
Larger Model Shown:
Specifications
| Specification | FSG-45 Series | FSG-51 Series | FSH-59 Series |
|---|---|---|---|
| Swing Over Bed | 45" | 51" | 59" |
| Swing Over Gap | 67" | 67" | 80" |
| Swing Over Cross Slide | 33" | 33" | 47" |
| Width of Bed | 26" | 26" | 33" |
| Distance Between Centers | 160"~240" | 354" | 360" |
| Spindle Bore | Ø 6" (Opt. Ø 16", 21") | 9”, Opt. 16”, 21” | 9”, Opt. 10", 12", 16”, 21” |
| Spindle Bore Nose | A2-11 (Opt. A2-20 for 16", 21") | A2-15 (A2-20 for 16” , 21”) | A2-15 (A2-20: 12”, etc.) |
| Spindle Speed | 4-400 RPM (3-300 RPM for 16", 21") | 3~300 RPM for 9”, 16”, 21” | 4 ~ 400 RPM (3~300 RPM for 12”, etc.) |
| Tailstock Quill Diameter | Ø 4.9" | Ø 4.9" | Ø 6.1" |
| Taper of Center | MT#6 | MT#6 | MT#6 |
| Quill Travel | 13.4" | 13.4" | 13.4" |
| Cross Feeds | 0.002 – 0.20 In/Rev(0.042-5.04 mm/rev) | 0.002 – 0.20 In/Rev(0.042-5.04 mm/rev) | 0.002 – 0.20 In/Rev(0.042-5.04 mm/rev) |
| Cross Travel | 25" | 25" | 29.5" |
| Compound Rest Travel | 16.5" | 16.5" | 16.5" |
| Longitudinal Feeds | 0.004 – 0.40 In/Rev (0.085-10.08 mm/rev) | 0.004 – 0.40 In/Rev (0.085-10.08 mm/rev) | 0.004 – 0.40 In/Rev (0.085-10.08 mm/rev) |
| Threading Range | 0.25-30 TPI (70 Kinds) | 0.25-30 TPI (70 Kinds) | 0.25-30 TPI (70 Kinds) |
| Module Pitch Threads | 0.25 – 30 M.P. (53 Kinds) | 0.25 – 30 M.P. (53 Kinds) | 0.25 – 30 M.P. (53 Kinds) |
| DP Pitch Threads | 1 ~ 120 mm (70 Kinds) | 1 ~ 120 mm (70 Kinds) | 1 ~ 120 mm (70 Kinds) |
| Main Motor | 25 HPx4P (Opt. 30 HP) | 25 HPx4P (Opt. 30 HP) | 30 HPx4P (Opt. 40 HP) |
| Rapid Motor | 1 HP | 1 HP | 1 HP |
| Coolant Pump | 1/8 HP | 1/8 HP | 1/8 HP |
| Machine Dimensions | 340 x 80 x 80 inch for FSG-45240 model (Add or subtract length by 40” per Meter variation in length) | 510 x 80 x 80 inch for FSG-51360 model (Add or subtract length by 40” per Meter variation in length) | 468” x 90” x 95” inch |
| Net Weight | 13,600 KGS for FSG-45240 (weight vary by around 1,200 KGS per meter difference) | 17,800 KGS for FSG-51360 (weight vary by around 1,200 KGS per meter difference) | 23,000 KGS |
Accessories
Standard Accessories
- Auto lubrication system
- Work lights, Thread chasing dial, Chuck cover
- Electric magnetic spindle brake
- Spindle and Tail stock centers
- 4-way rapid traverse device
- Full length mobile rear splash guard
Optional Accessories
- Coolant system
- Custom upgrade from 6” spindle bore to 16” spindle bore (A2-20)
- Custom upgrade from 6” spindle bore to 21” spindle bore (A2-20)
- DRO system 360” (2-axis, x=0.0001”/Z=0.0005” Res.)
- DRO installation charge for up to 360” between center model
- Aloris DA #5-SET (Tool Post and 6 holders)
- Royal spindle type live center (M.T. #6)
- 3-jaw chuck w/back plate (16” A2-20)
- 3-jaw chuck w/back plate (25” A2-20)
- Precision 3-jaw chuck w/back plate (Zero-set, 15” A2-15)
- 4-jaw independent Chuck (24” A2-20)
- 4-jaw independent Chuck (28” A2-15)
- Rear adaptor plate for rear mount chuck with 6” through hole
- Rear adaptor plate for rear mount chuck with 16”/21” through hole
- Steady rest (ø50-300mm)
- Steady rest (ø300-600mm)
- Roller support bracket
- Face plate (40” A2-15 for 6” bore)
- Taper turning attachment(34”(864mm) travel)
- Upgrade to 30 HP spindle motor
