CHL-21 Series

Features

15 HP Fanuc Servo Spindle motor
4 operating modes: Manual, Teach-in, Conversational, and CNC
Rigid Meehanite castings with extra ribbing
Induction hardened and ground ways
4 speed Auto-shifting gearbox with alloy steel gears that are hardened and ground
Extra large precision ground ballscrews
20-2000 RPM range; electronic handwheels
Auto Lube system with metered Check valves

Specification	CSC-18 Series	CHL-21 Series	CHC-22 Series
Swing Over Bed	18"	20.98"	21.7"
Swing Over Cross Slide	10"	11.8"	12.795"
Distance Between Centers	38" / 57"	40" / 60" / 80" / 120"	40" / 60" / 80" / 120"
Width of Bed	12"	13.58"	13.58"
Spindle Nose	ASA A2-6	D1-8 or ASA A2-8	ASA A2-8
Spindle Bore	2.56"	3.149"	3.58"
Spindle Taper	M.T. #6 w/ sleeves	M.T. #5	M.T. #5
Spindle Speeds	40-4000 RPM	20-2000 RPM	35-3500 RPM
Longitudinal Travel (Z-Axis)	33.5" / 53"	28.3" / 107.1"	30.7" / 50.4"/ 70.1" / 109.4"
Cross Slide Travel (X-Axis)	9.05"	11.8"	11.8"
Z-Axis Ballscrew Diameter	1-5/16", 10 mm pitch	1.97", 10 mm pitch / 2.48", 10 mm pitch	1.97", 10 mm pitch / 2.48", 10 mm pitch
X-Axis Ballscrew Diameter	2”, 5 mm pitch	0.98", 5 mm pitch	0.98", 5 mm pitch
Z-Axis Rapid Traverse Speed	393"/min	394"/min	394"/min
X-Axis Rapid Traverse Speed	295"/min	295"/min	295"/min
Tailstock Quill Diameter	2.677"	3.346"	3.346"
Tailstock Quill Travel	6"	7"	7"
Tailstock Taper	M.T. #4	M.T. #5	M.T. #5
Spindle Motor	15 HP	15 HP	15 HP
AC Servo Motor (Z-Axis)	3.8 HP	2.7 HP	3.4 HP
AC Servo Motor (X-Axis)	1.3 HP	1.8 HP	2.4 HP
Net Weight	5170 LBS / 5720 LBS	8929 LBS / 11684 LBS	8910 LBS / 9680 LBS / 10560 LBS / 11660 LBS
Gross Weight	6300 LBS / 6840 LBS	9810 LBS / 13228 LBS	9790 LBS / 10780 LBS / 11880 LBS / 13200 LBS
Packing Dimension	112.6" x 83.3" x 92" / 132.3" x 83.3" x 92"	126" x 90.6" x 88" / 204.7" x 90.6" x 88"	126" x 90.6" x 87.8" / 204.7" x 90.6" x 87.8"

Title: Kent USA CNC Manual Teachable Precision Lathe (Email)