CRL-1640
Features
- 10 HP Peak Fagor Servo Spindle motor
- Manual and CNC mode
- Rigid Meehanite castings with extra ribbing
- Induction hardened and ground ways
- 2 speed semi-automatic gearbox with alloy steel gears that are hardened and ground
- Extra large precision ground ballscrews
- 25-3000 RPM range; electronic handwheels
- Auto Lube system with metered Check valves
- Automatic 4 position electric Turret
Specifications
| Specification | CRL-1640 |
|---|---|
| Swing Over Bed | 16" |
| Swing Over Cross Slide | 9.05" |
| Distance Between Centers | 35" |
| Width of Bed | 10.23" |
| Spindle Nose | Camlock D1-6 (Opt. ASA A1-6) |
| Spindle Bore | 2.066" |
| Spindle Taper | M.T. #6 |
| Spindle Speeds | 25-3000 RPM (2 Steps) |
| Longitudinal Travel (Z-Axis) | 33" |
| Cross Slide Travel (X-Axis) | 8.5" |
| Z-Axis Ballscrew Diameter | 1.259", 10 mm pitch |
| X-Axis Ballscrew Diameter | 0.787”, 5 mm pitch |
| Z-Axis Rapid Traverse Speed | 295"/min |
| X-Axis Rapid Traverse Speed | 196.8"/min |
| Tailstock Quill Diameter | 2.283" |
| Tailstock Quill Travel | 5.5" |
| Tailstock Taper | M.T. #4 |
| Spindle Motor | 7.5 HP |
| AC Servo Motor (Z-Axis) | 1.13 HP |
| AC Servo Motor (X-Axis) | 0.6 HP |
| Net Weight | 4730 LBS |
| Gross Weight | 5830 LBS |
| Packing Dimension | 125" x 79.7" x 86.6" |
Accessories
Standard Accessories
- Factory installed with FANUC 0i-Mate TF CNC Control
- Optional Fagor 8055i CNC control / AC servo spindle motor
- Auto lubrication unit
- Flood coolant system
Optional Accessories
- 3-jaw scroll chuck
- 4-jaw independent chuck
- Face plate
- Hydraulic chuck
- Hydraulic tailstock
- Follow rest
- Quick change toolpost
- Automatic 4 position electric toolpost
- Royal live center
