KLS-1760(II)
Features
- 6 HP main spindle motor
- 12 speeds, all geared headstock
- Hardened and ground gears and bedways
- Centralized lube system in headstock
- Cast iron machine bedways and base
- Removable chip pan for easy clean up
- Foot brake and T-Slot compound
- Inch/metric ruler on tailstock quill
- ISO 9001 certified manufacturer
Specifications
| Specification | KLS-1740(II) | KLS-1760(II) | KLS-1840G |
|---|---|---|---|
| Swing Over Bed | 17" | 17" | 18" |
| Swing Over Cross Slide | 10.2" | 10.2" | 10.8" |
| Swing Over Gap | 22" | 22" | 27.2" |
| Width of Bed | 12-1/4" | 12-1/4" | 12" |
| Distance Between Centers | 40" | 60" | 40" |
| Cross Slide Travel | 9.26" | 9.26" | 11.4" |
| Top Slide Travel | 4" | 4" | 4.7" |
| Spindle Speeds | 12 | 12 | 12 |
| Spindle Speed Range | 32-1800 RPM | 32-1800 RPM | 25-2000 RPM |
| Through Hole Diameter | 2-1/32" | 2-1/32" | 3.2" |
| Spindle Nose | D1-6 Camlock | D1-6 Camlock | D1-8 |
| Spindle Bore Taper | MT#6 | MT#6 | MT#5 w/ sleeve |
| Thread – Standard (Whit-worth) | 65 (1-5/8 to 72) TPI | 65 (1-5/8 to 72) TPI | 4-112 (50NOS) |
| Thread – Metric Pitch | 28 (0.5 to 20) mm | 28 (0.5 to 20) mm | 24 (0.25 to 7) mm |
| Longitudinal Feed | 0.0014" - 0.0439" in/rev | 0.0014" - 0.0439" in/rev | 0.0011" - 0.0316" |
| Cross Feed | 0.0010”-0.0330” in/rev | 0.0010”-0.0330” in/rev | 0.00024" - 0.0068" in/rev |
| Lead Screw Diameter | 1.33" | 1.33" | 1.38" |
| Threading Pitch | 4 TPI | 4 TPI | 4 TPI |
| Quill Travel | 4-3/4" | 4-3/4" | 4.7" |
| Quill Diameter | 2.36” | 2.36” | 2.36” |
| Quill Bore Taper | MT#4 | MT#4 | MT#4 |
| Main Motor | 6 or 4 HP (2 Speed, 3-phase) | 6 or 4 HP (2 Speed, 3-phase) | 7.3 HP |
| Coolant Pump Motor | 1/8 HP | 1/8 HP | 1/8 HP |
| Machine Dimension | 98" x 40" x 47" | 115" x 40" x 47" | 88" x 36" x 51" |
| Packing Dimension | 108" x 44" x 62" | 125" x 44" x 62" | 93" x 39" x 64" |
| Machine weight | 4090 lbs | 4450 lbs | 3813 lbs |
| Packing weight | 4310 lbs | 4670 lbs | 4365 lbs |
Accessories
Standard Accessories
- 3-jaw chuck
- 4-jaw chuck
- Face plate
- Steady rest
- Follow rest
- Thread chasing dial toolbox with standard tools
Optional Accessories
- Digital readout system (View Brochure)
- 5C lever style collet closer
- Royal spindle type live center
- Live center set with interchangeable tips
- BTC 3-jaw chuck with back plate
- Transformer for 440V power
- Rustlick lubricant
