CS-1860
Features
- 5 HP Spindle Motor, 12-Speeds
- Precision Spindle with 3 Point Support
- 2” Spindle Through Hole
- Hardened and ground spindle gears and shafts; hardened and ground bedways
- Solid Full Length Casting Base; Full-length Safety Foot Brake
- Spindle Jog Button Control
- One-shot/Auto Lubrication for Apron, Carriage, and Bed Ways
- Multi-position Adjustable Feed Position Stops
- Dual Inch/Metric Calibrated Tailstock Quill
Specifications
| Specification | ML/X-1740T | CS-1860 | MLX-2060T |
|---|---|---|---|
| Swing Over Bed | 17" | 18" | 20" |
| Swing Over Cross Slide | 10.875" | 10.2" | 14" |
| Swing Over Gap | 24.5" | 26.7" | 27.5" |
| Width of Bed | 12" | 13.2" | 12" |
| Distance Between Centers | 44" | 63" | 57" |
| Cross Slide Travel | 12" | 10.2" | 12" |
| Top Slide Travel | 4.75" | 5" | 4.75" |
| Spindle Bore | 3.15" | 3.2" | 3.15" |
| Spindle Speeds | 12 | 12 | 12 |
| Spindle Speed Range | 36-1800 RPM | 25-1500 RPM | 26-1500 RPM |
| Through Hole Diameter | 3.125" | 3.125" | 3.125" |
| Spindle Nose | D1-6 (D1-8 on MLX) | D1-8 | D1-8 |
| Spindle Bore Taper | MT#7 - MT#4 | MT#5 | MT#5 |
| Thread – Standard (Whit-worth) | 45 (2-72) TPI | 45 (2-72) TPI | 45 (2-72) TPI |
| Thread – Metric Pitch | 39 (0.2-14) mm | 41 (0.2-14) mm | 39 (0.2-14) mm |
| Longitudinal Feed | 0.0015"–0.04" in/rev | 0.0015"–0.04" in/rev | 0.0015"–0.04" in/rev |
| Cross Feed | 0.00075"–0.02" in/rev | 0.00075"–0.02" in/rev | 0.00075"–0.02" in/rev |
| Lead Screw Diameter | - | 21, D.P. 8 - 44 | - |
| Threading Pitch | - | 18, M0.3 – 3.5 | - |
| Quill Travel | 5" | 5.9" | 5" |
| Quill Diameter | 2.3" | 2.56" | 2.3" |
| Quill Bore Taper | MT#4 | MT#5 | MT#4 |
| Main Motor | 7.5 HP (10 HP on MLX) | 7.5 HP | 10 HP |
| Coolant Pump Motor | 1/8 HP | 1/8 HP | 1/8 HP |
| Machine Dimension | 89”x33”x58” | 114” x 39” x 58.3” | - |
| Packing Dimension | 95”x39”x63” | 135" x 59" x 83" | 115" x 39" x 63" |
| Machine weight | 3900 LBS | 4510 LBS | 4560 LBS |
| Packing weight | 4560 LBS | 4642 LBS | 5450 LBS |
Accessories
Standard Accessories
- 3-jaw chuck (10”)
- Chuck cover with interlock
- Steady rest & Follow rest
- Main leadscrew cover
- 4-position tool post
- Coolant system
- Full length splash guard
- Halogen work light
- Thread chasing dial
- 3 position carriage stop
- Bed mount carriage stop
- Electric cabinet interlock switch
Optional Accessories
- Digital Readout System (View Brochure)
- Aloris CA #4-SET (Tool Post and 6 holders)
- Royal spindle type live center (M.T. #4)
- Upgrade to “Zero-set” 3-jaw chuck w/back plate (10” D1-8)
- 4-jaw independent Chuck (12” D1-8)
- Face plate (14” D1-8)
- Taper turning attachment
- Micrometer carriage stop
