CTL-618EVS
Features
- 0-4000 infinitely variable spindle speeds using electronic vector drive
- 1-1/16” 5C thru-collet capacity
- Induction hardened and ground alloy steel bedways for extra longevity
- Full-bearing carriage
- T-Slot compound
- Inch/metric reading on dials
Specifications
| Specification | CTL-618EVS | SSM-1340BV | TRL-1340/V |
|---|---|---|---|
| Swing Over Bed | 11" | 13" | 13-3/8" |
| Swing Over Cross Slide | 6" | 8-1/4" | 8-1/4" |
| Swing Over Gap | 9" | 18-1/2" | 20" |
| Width of Bed | 6-3/4" | 7-1/2" | 9” |
| Distance Between Centers | 18" | 40" | 40" |
| Cross Slide Travel | 6" | 6-3/4" | 7" |
| Top Slide Travel | 3" | 3-1/2" | 4" |
| Spindle Bore | 1.5" | 1.5" | 1.5" |
| Spindle Speeds | Inf. Variable | 2 | 16 |
| Spindle Speed Range | 0-4000 RPM | 40-365 & 218-2000 RPM | 50-2570 RPM |
| Through Hole Diameter | - | 1-9/16" | 1-9/16" |
| Spindle Nose | - | ASA D1-4 Camlock | ASA D1-4 Camlock |
| Spindle Bore Taper | I - 5C (10°)” & O - 4° | MT#5 | MT#5 |
| Thread – Standard (Whit-worth) | 36 (11-108) TPI | 34 (2-56) TPI | 45 (2-72) TPI |
| Thread – Metric Pitch | 36 (0.275-2.7) mm | 33 (0.5-12) mm | 39 (0.2-14) mm |
| Longitudinal Feed | 5/16" - 7" ipm | 0.0016"–0.046" | 0.002"–0.067" |
| Cross Feed | 5/16" - 4" ipm | 0.0005”-0.015” | 0.001"–0.0375" |
| Lead Screw Diameter | 1" | 7/8" | 1-1/8" |
| Threading Pitch | 8 TPI | 8 TPI | 4 TPI |
| Quill Travel | 3.75" | 4" | 4" |
| Quill Diameter | 1.358" | 1-9/16" | 2" |
| Quill Bore Taper | MT#2 | MT#3 | MT#3 |
| Main Motor | 3 HP | 3 HP | 5 HP |
| Coolant Pump Motor | 1/4 HP | 1/8 HP | 1/8 HP |
| Machine Dimension | 65" x 28" x 58" | 74" x 28" x 54" | 81.5" x 32" x 56" |
| Packing Dimension | 85" x 36" x 68" | 77" x 30" x 60" | 90" x 37" x 60" |
| Machine weight | 2300 LBS | 1320 LBS | 2200 LBS |
| Packing weight | 2450 LBS | 1584 LBS | 2440 LBS |
Accessories
Standard Accessories
- 3-jaw chuck (6”)
- 5-C collet closer
- Coolant system
- Chip and coolant shield
- Halogen work light
- Toolbox with standard tools
Optional Accessories
- Tool setting gauge
- Collet fixture plates
- Vertical cut-off slide
- Steady rest
- Follow rest
- Face plate
- Taper turning attachment
- 6″ zero-set universal 3-jaw chuck with 4° back plate
- 6″ 4-jaw chuck with 4° back plate
- DRO system (View Brochure)
- 6 station automatic indexing turret
- Indicator carriage stop
- 4 station turret
- Radius turning attachment
- View Brochure Catalog
