HR-35 Series

Features

20 HP Spindle Motor, 12-Speeds
4.1” (6.1” Opt)Spindle Through Hole
Solid One Piece Full Length Casting Base and Bedways for Maximum Rigidity
Spindle Jog Button Control
One-shot Lubrication for Apron, Multi-position Adjustable Feed Position Stops
Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
Dual Inch/Metric Dials (Optional)

Specification	SHR-32 Series	HR-35 Series	LA-34 Series
Swing Over Bed	32"	34.6"	34"
Swing Over Cross Slide	23"	25.2"	24.4"
Swing Over Gap	44"	46"	46"
Width of Bed	18"	19"	20"
Distance Between Centers	80" (Opt. 120" / 160" / 200"/240"/280")	120" (Opt. 80" / 160" / 200")	60" (Opt. 80", 120", 160", 200")
Cross Slide Travel	16.5"	17.32"	11.02"
Top Slide Travel	10"	9.4"	12"
Spindle Bore	4" (Opt: 6"/9")	4.1" (Opt. 6.1")	6" (Opt. 9", 12")
Spindle Speeds	12 Steps	12	18
Spindle Speed Range	15-1000 RPM (Opt. 10-700 RPM)	14-1000 RPM	5 – 670 RPM (Opt. 4 – 500 RPM)
Through Hole Diameter	4" (Opt. 6" and 9")	4.1" (Opt. 6.1")	6"
Spindle Nose	A2-8 (Opt: A2-11)	D1-11 or A1-11	A2-11 (Opt. A2-15)
Thread – Standard (Whit-worth)	2-28 (DP 4-56)	45 (2-72) TPI	30 – 0.25 TPI
Thread – Metric Pitch	0.8-14 (MP 0.5-7)	39 (0.2-14) mm	1 – 120 mm
Longitudinal Feed	0.05-0.7 mm/rev	0.002"–0.0276" in/rev	0.0032 – 0.096 ipr
Cross Feed	-	0.001"–0.00138"	0.0016 – 0.048 ipr
Quill Travel	9”	12"	5.9" (Opt. 7.9")
Quill Diameter	3-3/4” / Opt: 4-1/8”	4.133"	4.9" (Opt. 6.5")
Quill Taper	MT#5 (Opt. MT#6)	MT#6	MT#5 (Opt. MT#6)
Main Motor	20 HP – 4P	20 HP	20 HP (Opt. 30 HP)
Coolant Pump Motor	1/8 HP	1/8 HP	1/8 HP
Packing Dimension	158" / 197" / 236" / 276" / 315" / 354" x 63" x 75"	198" x 69" x 73"	127" – 265" x 43" x 62"
Gross Weight	-	9130 - 15400 lbs	13800 – 27000 lbs

Title: KENT USA HR-series heavy duty precision lathe brochure(2021)