S-2000
Features
- 15 HP Peak AC Servo Spindle Motor
- Meehanite casting for superior rigidity
- Hardened and Ground Square Y and Z-axis ways
- Hardened and Ground table top and dovetail ways
- Precision Ground ballscrews on X, Y and Z-axis
- Ultra precision ground spindle, ABEC-7 bearings
- Hardened and Ground spindle spline and taper
- Auto Lube system with metered Check valves
- Metal telescoping way cover on Y-axis
- Built in Coolant system and Chip pan
- Halogen work light
- Optional MPG Handwheels on X, Y, & Z axis
Specifications
| Specification | TW-50MCO | S-1500 | S-2000 |
|---|---|---|---|
| Table Size | 18" x 68" | 24" x 73" | 30" x 92" |
| Table Travel (X-Axis) | 50" (48" w/ control) | 60" | 78.7" |
| Saddle Travel (Y-Axis) | 21" (20" w/ control) | 27" | 32" |
| Vertical Travel (Z-Axis) | 22" (20" w/ control) | 27" | 28" |
| Spindle Center to Column | 21.3" | 30.5" | 35" |
| Spindle to Table | 3.54" to 27.16" | 3" to 31" | 3" to 31" |
| T-Slots (number x width) | 3 x 5/8" | 5 x 5/8" | 5 x 5/8" |
| Coolant Pump | 0.25 HP | 0.25 HP | 0.25 HP |
| Spindle Motor | 10 HP (7.5 HP for Fanuc System) | 10 HP | 15 HP |
| Spindle Taper | CAT 40 (Opt. BT-40) | CAT 40 (Opt. BT-40) | CAT 40 (Opt. BT-40) |
| Speed Range | 70-8000 RPM | 80-6000 RPM | 80-6000 RPM |
| Maximum Work Load | 1760 lbs | 3300 lbs | 3960 lbs |
| Net Weight | 7700 lbs | 9900 lbs | 16500 lbs |
| Gross Weight | 8500 lbs | 10890 lbs | 18150 lbs |
| Packing Dimension | 112" x 90" x 99" | 122" x 92" x 110" | 152" x 96" x 110" |
| Power Requirements | 220 volts, 60 Hz, 3-phase, 60 Amps | 220 volts, 60 Hz, 3-phase, 70 Amps | 220 volts, 60 Hz, 3-phase, 70 Amps |
Accessories
Standard Accessories
- Fanuc 0i-MD CNC Control
- Fanuc AC Servo Spindle Motor
- Auto–Lubrication Unit
- Flood Coolant System
Optional Accessories
- 20 Tool Carousel Type
- 440V Transformer
- Angle-Lock Vise
- Rotary Table
- Clamping Kit
- Titanium Nitride Coated End Mill Set
- Rustlick G25 Coolant
