TW-50MCO
Features
- 10 HP AC Servo Spindle Motor
- Meehanite GB300 casting for superior rigidity
- Hardened and Ground Square Y and Z-axis ways
- Hardened and Ground table top and dovetail ways
- Precision Ground ballscrews on X, Y and Z-axis
- Ultra precision ground spindle, ABEC-7 bearings
- Hardened and Ground spindle spline and taper
- Auto Lube system with metered Check valves
- Metal telescoping way cover on Y-axis
- Built in Coolant system and Chip pan
- Halogen work light
Specifications
| Specification | TW-40Qi/MCO | TW-50MCO | S-1500 |
|---|---|---|---|
| Table Size | 13" x 59" | 18" x 68" | 24" x 73" |
| Table Travel (X-Axis) | 40" (38" w/ control) | 50" (48" w/ control) | 60" |
| Saddle Travel (Y-Axis) | 21" (20" w/ control) | 21" (20" w/ control) | 27" |
| Vertical Travel (Z-Axis) | 22" (20" w/ control) | 22" (20" w/ control) | 27" |
| Spindle Center to Column | 21" | 21.3" | 30.5" |
| Spindle to Table | 4" to 24" | 3.54" to 27.16" | 3" to 31" |
| Quill Travel | 5.5" | - | |
| Quill Diameter | 4.173" | - | |
| T-Slots (number x width) | 3 x 5/8" | 3 x 5/8" | 5 x 5/8" |
| Coolant Pump | 0.25 HP | 0.25 HP | 0.25 HP |
| Spindle Motor | 7.5 HP | 10 HP (7.5 HP for Fanuc System) | 10 HP |
| Spindle Taper | NMTB-40 | CAT 40 (Opt. BT-40) | CAT 40 (Opt. BT-40) |
| Speed Range | 60-6000 RPM | 70-8000 RPM | 80-6000 RPM |
| Quill Power Feed (per rev) | 0.0017" / 0.0032" / 0.0054" | - | |
| Drilling Capacity (Manual) | 1.25" | - | |
| Drilling Capacity (Power) | 0.625" | - | |
| Boring Capacity | 8" Diameter | 8" Diameter | |
| Milling Capacity | 2.5 in³/min | 2.5 in³/min | |
| Maximum Work Load | 1400 lbs | 1760 lbs | 3300 lbs |
| Net Weight | 6050 lbs | 7700 lbs | 9900 lbs |
| Gross Weight | 6350 lbs | 8500 lbs | 10890 lbs |
| Packing Dimension | 79" x 76" x 98" | 112" x 90" x 99" | 122" x 92" x 110" |
| Power Requirements | 220 volts, 60 Hz, 3-phase, 45 Amps | 220 volts, 60 Hz, 3-phase, 60 Amps | 220 volts, 60 Hz, 3-phase, 70 Amps |
Accessories
Standard Accessories
- 20 Tools Carousel ATC
- Auto-Lubrication Unit
- Flood Coolant System
Optional Accessories
- MPG Handheld Jog Box
- Clamping Kit
- CAT 40 End Mill Adapters
- Rustlick G25 Coolant
- Angle-Lock Vise
- Rotary Table
- Full Enclosure
