TRD-2000H
Features
- 12 spindle speed and 3 feed rates
- Centralized single level control for forward and reversal of spindle
- Ultra low noise
- Light and handy to operate
- Safety overload
- Auxiliary dial for spindle feed depth
- With standard accessories
Specifications
Specification | TRD-1600H | TRD-2000H | TRD-C2500 |
---|---|---|---|
Maximum Drilling Diameter (Castings/Steel) | 2.75″ / 2.55″ | 2.55″ / 2.75″ | 3.94″ / 3.15″ |
Distance Between Spindle Axis and Column (max/min) | 62″ / 17.3″ | 74.8″ / 19.7″ | 98.4″ / 19.68″ |
Distance Between Spindle End and Working Surface of Base Plate (max/min) | 62.9″ / 17.3″ | 62.9″ / 14.9″ | 78.7″ / 21.6″ |
Spindle Taper | M.T. 5 | M.T. 5 | M.T. 6 |
Range of Spindle Speed | 40-1920 RPM (12 steps) | 35-1890 RPM (12 steps) | 16-1250 RPM (16 steps) |
Range of Spindle Feed Speed | 0.0027”-0.0378”/Rev. (6 steps) | 0.07-0.96rev (6 steps) | 0.0016”-0.125”/Rev. (16 steps) |
Diameter of Outer Column | 17″ | 17″ | 21.6″ |
Length of Arm | 64" | 82" | 102" |
Table Size | 27.5″ x 19.7″ x 15.7″ | 39.4″ x 31.5″ x 19.7″ | 39.4″ X 31.5″ X 22″ |
Spindle Motor | 7.5 HP | 10 HP | 10 HP |
Net Weight | 10120 LBS | 12346 LBS | 24200 LBS |
Gross Weight | 11220 LBS | 14551 LBS | 27500 LBS |
Accessories
Standard Accessories
- Work table
- Tool releasing wrench
- Drift
- Reducing sleeve
- Coolant system
- Work light
Brochures
Title: Kent USA TRD Radial Drill