CSM-1440

Features

5 HP Frequency Drive Motor for Acu-Rite TURNPWR (Opt. Fagor CNC Control with 7.5 HP Fagor Servo Spindle Motor)
Manual and CNC mode conversational control
Rigid Meehanite castings with extra ribbing
Induction hardened and ground ways
Gearbox with alloy steel gears that are hardened and ground
Extra-large precision ground Ballscrews
50-2,000 RPM range; electronic handwheels
Auto Lube System with metered Check valves
Optional Automatic 4 position electric Turret available

Specification	CSM-1440	CSM-1640	CRL-1640
Swing Over Bed	14"	16"	16"
Swing Over Cross Slide	7.48"	8.46"	9.05"
Distance Between Centers	40"	40"	35"
Width of Bed	8.1"	11"	10.23"
Spindle Nose	Camlock D1-4 (Opt. ASA A1-4)	Camlock D1-6	Camlock D1-6 (Opt. ASA A1-6)
Spindle Bore	1.5"	2-1/4"	2.066"
Spindle Taper	M.T. #5	M.T. #6	M.T. #6
Spindle Speeds	50-2000 RPM	50-2000 RPM	25-3000 RPM (2 Steps)
Longitudinal Travel (Z-Axis)	33"	33"	33"
Cross Slide Travel (X-Axis)	8"	8"	8.5"
Z-Axis Ballscrew Diameter	1.259", 5 mm pitch	1.259", 5 mm pitch	1.259", 10 mm pitch
X-Axis Ballscrew Diameter	0.98”, 5 mm pitch	0.98”, 5 mm pitch	0.787”, 5 mm pitch
Z-Axis Rapid Traverse Speed	236"/min	236"/min	295"/min
X-Axis Rapid Traverse Speed	236"/min	236"/min	196.8"/min
Tailstock Quill Diameter	1-3/4"	2.12"	2.283"
Tailstock Quill Travel	4-3/4"	5.1"	5.5"
Tailstock Taper	M.T. #3	M.T. #4	M.T. #4
Spindle Motor	5 HP (Opt. 7.5 HP)	7.5 HP (Opt. 7.5 HP Fagor)	7.5 HP
AC Servo Motor (Z-Axis)	1.1 HP	1.2 HP	1.13 HP
AC Servo Motor (X-Axis)	1.1 HP	1.7 HP	0.6 HP
Net Weight	2530 LBS	3520 LBS	4730 LBS
Gross Weight	2750 LBS	3740 LBS	5830 LBS
Packing Dimension	100" x 65" x 79"	91" x 69" x 73"	125" x 79.7" x 86.6"

Title: CSM-1440 with AcuRite TURNPWR Control

Download