SGS-2480PNC

Features

24″ x 84.6″ working capacity; 3 axis automatic cycles: Surface, Plunge, and Crisscross modes
Color touch screen PLC control for easy and intuitive operation
Precision hand scraped turcite ways
Double-vee column cross traverse; full support double-vee longitudinal ways
AC servo motor driven ball screw on Z-axis for precision positioning and control
Hydraulic table & electronic crossfeed
Automatic lubricator & rapid elevation
Electric cabinet with heat exchanger; hydraulic system with separate chiller system

Specification	SGS-2448PNC	SGS-2460PNC	SGS-2480PNC
Longitudinal Travel	53.1"	65"	84.6"
Saddle Travel	25.98"	25.98"	25.98"
Table Size	23.6" x 54.3"	23.6" x 66"	23.6" x 78.7"
Wheel Speed	1150 RPM (60 Hz) / 960 RPM (50 Hz)	1150 RPM (60 Hz) / 960 RPM (50 Hz)	1150 RPM (60 Hz) / 960 RPM (50 Hz)
Downfeed per Graduation (MPG)	0.001, 0.005, 0.01	0.001, 0.005, 0.01	0.001, 0.005, 0.01 mm
Downfeed per Revolution (MPG)	0.1, 0.5, 1	0.1, 0.5, 1	0.1, 0.5, 1 mm
Auto Downfeed by Servo Motor	0.001-0.005	0.001-0.005	0.001" - 0.005"
Longitudinal Table Speed	0.5-32	0.5-32	0.5 - 32
Crossfeed Intermittent	0.1-40	0.1-40	0.1 - 40 mm/step
Crossfeed Continuous	0.3-1.5, 1	0.3-1.5, 1	0.3 - 1.5 mm
Crossfeed per Graduation (MPG)	0.001. 0.005, 0.01	0.001. 0.005, 0.01	0.001. 0.005, 0.01
Crossfeed per Revolution (MPG)	0.1, 0.5, 1	0.1, 0.5, 1	0.1, 0.5, 1
Grinding Wheel	20" x 5" x 1.97"	20" x 5" x 1.97"	20" x 2" x 5"
Vertical Display Resolution	0.0001"	0.0001"	0.0001"
Vertical Positioning	x1 / x5 / x10	x1 / x5 / x10	x1 / x5 / x10
Spindle Center to Table	31.5" (Opt. 39.4")	31.5" (Opt. 39.4")	31.5" (Opt. 39.4")
Gross Weight	19,841 lbs	21,605 lbs	24,030 lbs
Floor Space	183” x 125” x 97”	211” x 125” x 97”	250” x 125” x 97”
Spindle Motor	15 HP (Opt. 20 HP)	15 HP (Opt. 20 HP)	15 HP (Opt. 20 HP)