CGS-818M
Features
- Roller ball on linear table ways for easy and smooth longitudinal movements
- Hardened and ground Z axis column ways with 18” spindle center to table
- Cartridge type spindle design for easy serviceability
- Large hand wheels on all axis for easy operation
- Over 1650 pound net weight
- Centralized auto lubrication system provides lubrication to all points
- Precision matched leadscrew and nut sets
- Micro feed for Z (0.00005”) axis
Specifications
| Specification | CGS-618M | CGS-818M | KGS-1020 |
|---|---|---|---|
| Working Capacity | 6" x 18" | 8" x 18" | 10" x 20" |
| Table Travel | 19" | 19" | 24.5" |
| Saddle Travel | 6.69" | 8.69" | 12.5" |
| T-Slot | 1 x 9/16" | 1 x 9/16” | 1 x 9/16” |
| Spindle Motor | 3 HP | 3 HP | 3 HP |
| Spindle Speed | 3450 RPM | 3450 RPM | 1750 RPM |
| Grinding Wheel | 8” x 1/2” x 1-1/4” | 8” x 1/2” x 1-1/4” | 12" x 1" x 3" |
| Vertical Graduation | 0.0002" (0.00005” on microfeed dial) | 0.0002” (0.00005” on microfeed dial) | 0.0005" |
| Vertical Revolution | 0.050" | 0.050" | 0.050" |
| Spindle to Table | 18" | 18" | 21" |
| Net Weight | 1600 lbs | 1650 LBS | 3256 LBS |
| Gross Weight | 1800 lbs | 1850 LBS | 3800 LBS |
Accessories
Standard Accessories
- Grinding wheel
- Wheel Flange
- Wheel balancing base
- Wheel balancing arbor
- Diamond table dresser base & tip
- Leveling bolts & pads
- Halogen work light
- Toolbox with tools
Optional Accessories
- Fine pole electric chuck & control
- Permanent chuck
- Rotary magnetic chuck
- Dust-suction coolant system
- Flood coolant system
- Overhead parallel dresser
- Extra wheel flange
- Digital Readout System (View Brochure)
