M-60
Features
- 1.5 H.P. Spindle Motor
- Precision ABEC 7 Angular Contact Ball Bearing Spindle
- Rollerball on linear table ways for easy and smooth movements
- Centralized one-shot lube; Table Swivels 120 degree Allows for More Versatile Setups
- Tilting Wheelhead Also for Easy Angle Grinding
Specifications
| Specification | M-40 | M-60 |
|---|---|---|
| Swing Over Table | 10" | 10" |
| Distance Between Centers | 27.5" | 35.43" |
| Distance Between Tailstock and Workhead | 22.75" | 30.7" |
| Taper Hole in Workhead Spindle | One End – ASA #50; Other end – M.T. #5 | One End – ASA #50; Other end – M.T. #5 |
| T-Slot | 1 x 0.565” | 1 x 0.565” |
| Working Surface | 5-5/16” x 37” | 5-5/16” x 44.88” |
| Grinding Wheel Spindle | 2600, 3700, 6200 R.P.M. | 2600, 3700, 6200 R.P.M. |
| Spindle Motor | 1.5 HP | 1.5 HP |
| Table Longitudinal Travel | 16" | 23.62" |
| Saddle Cross Travel | 10" | 10" |
| Table Swivel Travel | +/- 60° | +/- 60° |
| Table Graduation on End | +/- 10° | +/- 10° |
| Wheel Head Tilt | +/- 15° | +/- 15° |
| Wheel Head Swivel | 360° | 360° |
| Vertical Travel of Wheel Head | 10” | 10” |
| Wheel Spindle Center to Top of Table | Max – 12”, Min – 2” | Max – 12”, Min – 2” |
| Wheel Spindle Center to T-Slot Center | Max – 16.5”, Min – 6 ½” | Max – 16.5”, Min – 6 ½” |
| Floor Space Required | 61” x 68.5” | 108” x 61” |
| Packing dimension | 57.48” x 57.48” x 59.45” | 120” x 70” x 60” |
| Net weight | 2,560 lbs | 2,800 lbs |
| Gross weight | 2,980 lbs | 3,200 lbs |
Accessories
Standard Accessories
- Leveling Blocks
- Workhead
- Right-hand Tailstock
- Center Gauge
- Ejector Rod
- Center for Workhead Spindle MT5
- Diamond Dresser Holder
- Grinding Wheel Washer Set
- Wheel Guard (Outer Diameter of Grinding Wheel Max. Ø90)
- Wheel Guard (Outer Diameter of Grinding Wheel Max. Ø110)
- Wheel Guard (Outer Diameter of Grinding Wheel Max. Ø125)
- Wheel Guard (Outer Diameter of Grinding Wheel Max. Ø150)
- Wheel Guard Holder (short)
- Wheel Guard Holder (long)
- 2 Sets Grinding Wheel Flanges
- 4” Grinding Wheel Flange Extension (Ø31.75 mm)
- Grinding Wheel (PA 90D x 38T x 31.75H)
- Grinding Wheel (GC 125D x 38T x 31.75H)
- Grinding Wheel (WA 150D x 13T x 31.75H)
- Grinding Wheel (GC 150D x 13T x 31.75H)
- Grinding Wheel (WA 150D x 19T x 31.75H)
- Draw-in Bolt for Workhead and Spacer (metric thread)
- Wheel Spanner
- Collet Wrench
- Fixture Rod
- Open End Wrench (17-19 mm)
- Combination Wrench (19 mm)
- Combination Wrench (24 mm)
- Tool Box & Adjusting Tool
Optional Accessories
- Left-hand Tailstock
- Tool Holder
- MT5 to MT2 Morse Taper Sleeve
- MT5 to MT3 Morse Taper Sleeve
- MT5 to MT4 Morse Taper Sleeve
- 4” Grinding Wheel Flange Extension (Ø12.7 mm)
- Universal Tooth Rest Plate and Blade Holder Extension Tool Grinding Attachment
- Plain Tooth Rest Holder
- Plain Tooth Rest Holder
- Fine Adjustment Guide Rod
- Grinding Wheel (WA 76D x 12.7T x 12.7H) 31.5C Chuck
- Grinding Wheel (A 100D x 1.5T x 12.7H)
- Frequency Converter
- T-Wrench
- Belt for Spindle Drive
- Touch-Up Paint
- Radius Grinding Attachment (Radius NO.1)
- Radius Grinding Attachment (Radius NO.2)
- Face Mill Grinding Attachment
- Helical Grinding Attachment
- Cylindrical Grinding Attachment
- Internal Grinding Attachment
- Workhead Indexing Attachment
- Extended Grinding Wheel Spindle
- Surface Grinding Attachment
- Drill Pointing Attachment
- Lathe Tool & Planer Tool Grinding Attachment
- Spring Collet Set
- Dust Collector
- Wet Grinding Attachment with Waterproof Equipment
- 5C Chuck
- CCD System with Software and IPC
- Linear Scale (Resolution of X and Y axes is 0.001)
- Linear Guideway – X axis (M-40)
- Hydraulic Device – X axis (M-40) Travel:350 mm
- PLC Controller – X axis (M-40) Travel:300 mm
- PLC Controller – Y axis
- Upgrading Grinding Wheel Spindle Motor to 2 HP
- CE Safety Device
- Transformer
