CHC-22 Series

Features

15 HP Fanuc Servo Spindle motor
4 operating modes: Manual, Teach-in, Conversational, and CNC
Rigid Meehanite castings with extra ribbing
Induction hardened and ground ways
4 speed Auto-shifting gearbox with alloy steel gears that are hardened and ground
Extra large precision ground ballscrews
20-2000 RPM range; electronic handwheels
Auto Lube system with metered Check valves

Specification	CHL-21 Series	CHC-22 Series	CAC-30 Series
Swing Over Bed	20.98"	21.7"	30"
Swing Over Cross Slide	11.8"	12.795"	21.3"
Distance Between Centers	40" / 60" / 80" / 120"	40" / 60" / 80" / 120"	82.7" / 121.3"
Width of Bed	13.58"	13.58"	18"
Spindle Nose	D1-8 or ASA A2-8	ASA A2-8	A2-11
Spindle Bore	3.149"	3.58"
Spindle Taper	M.T. #5	M.T. #5	-
Spindle Speeds	20-2000 RPM	35-3500 RPM	Low: 20-92 RPM / Middle: 93-330 RPM / High: 331-1500 RPM (Opt. A2-11, 6” bore, 10-52-175-800RPM; A2-15, 9” bore, 20-800RPM)
Longitudinal Travel (Z-Axis)	28.3" / 107.1"	30.7" / 50.4"/ 70.1" / 109.4"	78.7" / 117"
Cross Slide Travel (X-Axis)	11.8"	11.8"	17.7"
Z-Axis Ballscrew Diameter	1.97", 10 mm pitch / 2.48", 10 mm pitch	1.97", 10 mm pitch / 2.48", 10 mm pitch	2", 10 mm pitch
X-Axis Ballscrew Diameter	0.98", 5 mm pitch	0.98", 5 mm pitch	1.3", 5 mm pitch
Z-Axis Rapid Traverse Speed	394"/min	394"/min	240"/min
X-Axis Rapid Traverse Speed	295"/min	295"/min	200"/min
Tailstock Quill Diameter	3.346"	3.346"	4.1"
Tailstock Quill Travel	7"	7"	8"
Tailstock Taper	M.T. #5	M.T. #5	M.T. #5
Spindle Motor	15 HP	15 HP	20 HP
AC Servo Motor (Z-Axis)	2.7 HP	3.4 HP	4 HP
AC Servo Motor (X-Axis)	1.8 HP	2.4 HP	2.4 HP
Net Weight	8929 LBS / 11684 LBS	8910 LBS / 9680 LBS / 10560 LBS / 11660 LBS	10560 LBS / 12100 LBS
Gross Weight	9810 LBS / 13228 LBS	9790 LBS / 10780 LBS / 11880 LBS / 13200 LBS	11880 LBS / 14000 LBS
Packing Dimension	126" x 90.6" x 88" / 204.7" x 90.6" x 88"	126" x 90.6" x 87.8" / 204.7" x 90.6" x 87.8"	177" / 217" x 90" x 90"

Title: Kent USA CNC Manual Teachable Precision Lathe (Email)