KLS-1740(II)
Features
- 6 HP main spindle motor
- 12 speeds, all geared headstock
- Hardened and ground gears and bedways
- Centralized lube system in headstock
- Cast iron machine bedways and base
- Removable chip pan for easy clean up
- Foot brake and T-Slot compound
- Inch/metric ruler on tailstock quill
- ISO 9001 certified manufacturer
Specifications
| Specification | KLS-1440 | KLS-1740(II) | KLS-1760(II) |
|---|---|---|---|
| Swing Over Bed | 14" | 17" | 17" |
| Swing Over Cross Slide | 8–5/8" | 10.2" | 10.2" |
| Swing Over Gap | 20" | 22" | 22" |
| Width of Bed | 8-1/8" | 12-1/4" | 12-1/4" |
| Distance Between Centers | 40" | 40" | 60" |
| Cross Slide Travel | 7" | 9.26" | 9.26" |
| Top Slide Travel | 4" | 4" | 4" |
| Spindle Speeds | 16 | 12 | 12 |
| Spindle Speed Range | 45-1800 RPM | 32-1800 RPM | 32-1800 RPM |
| Through Hole Diameter | 1-1/2" | 2-1/32" | 2-1/32" |
| Spindle Nose | D1-4 Camlock | D1-6 Camlock | D1-6 Camlock |
| Spindle Bore Taper | MT#5 | MT#6 | MT#6 |
| Thread – Standard (Whit-worth) | 40 (4–112) TPI | 65 (1-5/8 to 72) TPI | 65 (1-5/8 to 72) TPI |
| Thread – Metric Pitch | 22 (0.4–7.5) mm | 28 (0.5 to 20) mm | 28 (0.5 to 20) mm |
| Longitudinal Feed | 0.0012”-0.0294” in/rev | 0.0014" - 0.0439" in/rev | 0.0014" - 0.0439" in/rev |
| Cross Feed | 0.0004”-0.0108” in/rev | 0.0010”-0.0330” in/rev | 0.0010”-0.0330” in/rev |
| Lead Screw Diameter | 7/8" | 1.33" | 1.33" |
| Threading Pitch | 8 TPI | 4 TPI | 4 TPI |
| Quill Travel | 4-3/4" | 4-3/4" | 4-3/4" |
| Quill Diameter | 1-25/32" | 2.36” | 2.36” |
| Quill Bore Taper | MT#3 | MT#4 | MT#4 |
| Main Motor | 3 HP (2 Speed, 3-phase) | 6 or 4 HP (2 Speed, 3-phase) | 6 or 4 HP (2 Speed, 3-phase) |
| Coolant Pump Motor | 1/8 HP | 1/8 HP | 1/8 HP |
| Machine Dimension | 76" x 29" x 47" | 98" x 40" x 47" | 115" x 40" x 47" |
| Packing Dimension | 80" x 35" x 61" | 108" x 44" x 62" | 125" x 44" x 62" |
| Machine weight | 1650 LBS | 4090 lbs | 4450 lbs |
| Packing weight | 1950 LBS | 4310 lbs | 4670 lbs |
Accessories
Standard Accessories
- 3-jaw chuck
- 4-jaw chuck
- Face plate
- Steady rest
- Follow rest
- Thread chasing dial toolbox with standard tools
Optional Accessories
- Digital readout system (View Brochure)
- 5C lever style collet closer
- Royal spindle type live center
- Live center set with interchangeable tips
- BTC 3-jaw chuck with back plate
- Transformer for 440V power
