CS-2280
Features
- 10 HP Spindle Motor, 12-Speeds
- Precision Spindle with 3 Point Support
- 3.2” Spindle Through Hole
- Hardened and ground spindle gears and shafts; hardened and ground bedways
- Solid Full Length Casting Base; Full-length Safety Foot Brake
- Spindle Jog Button Control
- One-shot/Auto Lubrication for Apron, Carriage, and Bed Ways
- Multi-position Adjustable Feed Position Stops
- Dual Inch/Metric Calibrated Tailstock Quill
Specifications
| Specification | MLX-2060T | CS-2280 | HW-26 Series |
|---|---|---|---|
| Swing Over Bed | 20" | 22" | 26" |
| Swing Over Cross Slide | 14" | 14.2" | 17.3" |
| Swing Over Gap | 27.5" | 30.7" | 35" |
| Width of Bed | 12" | 13.2” | 15.75" |
| Distance Between Centers | 57" | 86.5" | 80" (Opt. 120" / 160") |
| Cross Slide Travel | 12" | 10.2" | 14.75" |
| Top Slide Travel | 4.75" | 5" | 8" |
| Spindle Bore | 3.15" | 3.15" | 4.5" |
| Spindle Speeds | 12 | 12 | 12 |
| Spindle Speed Range | 26-1500 RPM | 25-1500 RPM | 10-1000 RPM |
| Through Hole Diameter | 3.125" | 3.2" | 4.5" |
| Spindle Nose | D1-8 | D1-8 | D1-11 |
| Spindle Bore Taper | MT#5 | MT#5 | MT#7 |
| Thread – Standard (Whit-worth) | 45 (2-72) TPI | 45 (2-72) TPI | 44 (2-56) TPI |
| Thread – Metric Pitch | 39 (0.2-14) mm | 41, 0.2 - 14 mm | 39 (0.5-14) mm |
| Longitudinal Feed | 0.0015"–0.04" in/rev | 0.0015"–0.04" in/rev | 0.002"–0.032" in/rev |
| Cross Feed | 0.00075"–0.02" in/rev | 0.00075"–0.02" in/rev | 0.001"–0.0094" |
| Lead Screw Diameter | - | - | |
| Threading Pitch | - | - | |
| Quill Travel | 5" | 5.9” (150mm) | 6.5" |
| Quill Diameter | 2.3" | 2.95" | 3.3" |
| Quill Bore Taper | MT#4 | MT#5 | MT#5 |
| Main Motor | 10 HP | 10 HP | 15 HP |
| Coolant Pump Motor | 1/8 HP | 1/8 HP | 1/8 HP |
| Machine Dimension | - | - | |
| Packing Dimension | 115" x 39" x 63" | 138" x 39" x 61" | 137" / 186" / 219" x 41" x 52" |
| Machine weight | 4560 LBS | 5104 lbs | |
| Packing weight | 5450 LBS | 5408 lbs |
Accessories
Standard Accessories
- 3-jaw chuck (12″)
- 4-position tool post
- Thread chasing dial
- Steady rest
- Coolant system
Optional Accessories
- DRO System 80”(2-axis, x=0.0001”/z=0.0005” res)
- Aloris CA #4-SET (Tool Post and 6 holders)
- Aloris DA #5-SET (Tool Post and 6 holders)
- Royal spindle type live center (M.T. #5)
- BTC 3-jaw chuck w/back plate (Zero-set, 12” D1-8)
- 4-jaw independent Chuck (12” or 16″ D1-8)
- Face plate (20” D1-8)
- Taper turning attachment
- Micrometer carriage stop
