RML-1440VT
Features
- 5 HP main spindle motor using frequency drive and capable of running using single phase power
- Digital display 20–400-2500 infinitely variable spindle speeds
- Hardened and ground gears and bedways
- Cast iron machine bedways with full one piece cast base and front loading chip tray for easier cleaning
- Foot brake and T-Slot compound Inch/metric reading on dials
- Inch/metric ruler on tailstock quill
- ISO 9001 certified manufacturer
Specifications
| Specification | TRL-1340/V | RML-1440VT | RML-1640T |
|---|---|---|---|
| Swing Over Bed | 13-3/8" | 14-3/16" | 16-3/16" |
| Swing Over Cross Slide | 8-1/4" | 8-3/8" | 10-3/8" |
| Swing Over Gap | 20" | 21" | 23" |
| Width of Bed | 9” | 10-1/4" | 10-1/4" |
| Distance Between Centers | 40" | 40" | 40" |
| Cross Slide Travel | 7" | 8-11/16" | 8-11/16" |
| Top Slide Travel | 4" | 5-1/2" | 5-1/2" |
| Spindle Bore | 1.5" | 2.1" | 2.1" |
| Spindle Speeds | 16 | 2 | 12 |
| Spindle Speed Range | 50-2570 RPM | 20-400-2500 RPM | 36-1800 rpm |
| Through Hole Diameter | 1-9/16" | 2-1/16" | 2-1/16" |
| Spindle Nose | ASA D1-4 Camlock | D1-6 Camlock | D1-6 Camlock |
| Spindle Bore Taper | MT#5 | MT#6 | MT#6 |
| Thread – Standard (Whit-worth) | 45 (2-72) TPI | 45 (2-72) TPI | 45 (2-72) TPI |
| Thread – Metric Pitch | 39 (0.2-14) mm | 39 (0.2-14) mm | 39 (0.2-14) mm |
| Longitudinal Feed | 0.002"–0.067" | 0.002"–0.067" | 0.002"–0.067" |
| Cross Feed | 0.001"–0.0375" | 0.001”-0.034” in/rev | 0.001”-0.034” in/rev |
| Lead Screw Diameter | 1-1/8" | 1-1/8" | 1-1/8" |
| Threading Pitch | 4 TPI | 4 TPI | 4 TPI |
| Quill Travel | 4" | 6.5" | 6.5" |
| Quill Diameter | 2" | 2" | 2" |
| Quill Bore Taper | MT#3 | MT#4 | MT#4 |
| Main Motor | 5 HP | 5 HP | 5 HP |
| Coolant Pump Motor | 1/8 HP | 1/8 HP | 1/8 HP |
| Machine Dimension | 81.5" x 32" x 56" | 81" x 36" x 60" | 81" x 38" x 62" |
| Packing Dimension | 90" x 37" x 60" | 87" x 42" x 66" | 87" x 42" x 66" |
| Machine weight | 2200 LBS | 3190 LBS | 3520 LBS |
| Packing weight | 2440 LBS | 3630 LBS | 3960 LBS |
Accessories
Standard Accessories
- 3-jaw chuck (9″)
- Steady rest
- Follow rest
- 4-position tool post
- Coolant system
- Full-length splash guard
- Worklight
- Chuck cover
- Thread chasing dial
- Toolbox with standard tools
Optional Accessories
- 4-jaw chuck (10″)
- Digital Readout System (View Brochure)
- Royal spindle type live center
- BTC 3-jaw chuck with back plate
- Taper turning attachment
- Rustlick coolant
- Micro carriage stop
- Face plate (12″ D1-6)
- Transformer for 440V power (5 KVA)
