RML-1660VT
Features
- 5 HP main spindle motor
- 36-1800, 12 steps spindle speeds
- Hardened and ground gears and bedways
- Cast iron machine bedways with full one piece cast base and front loading chip tray for easier cleaning
- Foot brake and T-Slot compound Inch/metric reading on dials
- Inch/metric ruler on tailstock quill
- ISO 9001 certified manufacturer
- Enhance Your Turning Quality and Tool Longevity with the optional ACU-RITE CSS package
Specifications
| Specification | RML-1640T | RML-1660VT | ML/X-1740T |
|---|---|---|---|
| Swing Over Bed | 16-3/16" | 16-3/16" | 17" |
| Swing Over Cross Slide | 10-3/8" | 10-3/8" | 11" |
| Swing Over Gap | 23" | 23" | 24.5" |
| Width of Bed | 10-1/4" | 10-1/4" | 12" |
| Distance Between Centers | 40" | 60" | 44" |
| Cross Slide Travel | 8-11/16" | 8-11/16" | 12" |
| Top Slide Travel | 5-1/2" | 5-1/2" | 4.75" |
| Spindle Bore | 2.1" | 2.1" | 3.15" |
| Spindle Speeds | 12 | 12 | 12 |
| Spindle Speed Range | 36-1800 rpm | 36-1800 rpm | 36-1800 RPM |
| Through Hole Diameter | 2-1/16" | 2-1/16" | 3.125" |
| Spindle Nose | D1-6 Camlock | D1-6 Camlock | D1-6 (D1-8 on MLX) |
| Spindle Bore Taper | MT#6 | MT#6 | MT#7 - MT#4 |
| Thread – Standard (Whit-worth) | 45 (2-72) TPI | 45 (2-72) TPI | 45 (2-72) TPI |
| Thread – Metric Pitch | 39 (0.2-14) mm | 39 (0.2-14) mm | 39 (0.2-14) mm |
| Longitudinal Feed | 0.002"–0.067" | 0.002"–0.067" in/rev | 0.0015"–0.04" in/rev |
| Cross Feed | 0.001”-0.034” in/rev | 0.001”-0.034” in/rev | 0.00075"–0.02" in/rev |
| Lead Screw Diameter | 1-1/8" | 4/5" | - |
| Threading Pitch | 4 TPI | 4 TPI | - |
| Quill Travel | 6.5" | 6" | 5" |
| Quill Diameter | 2" | 2" | 2.3" |
| Quill Bore Taper | MT#4 | MT#4 | MT#4 |
| Main Motor | 5 HP | 5 HP | 7.5 HP (10 HP on MLX) |
| Coolant Pump Motor | 1/8 HP | 1/8 HP | 1/8 HP |
| Machine Dimension | 81" x 38" x 62" | 99" x 40" x 62" | 89”x33”x58” |
| Packing Dimension | 87" x 42" x 66" | 105" x 44" x 66" | 95”x39”x63” |
| Machine weight | 3520 LBS | 3740 LBS | 3850 LBS |
| Packing weight | 3960 LBS | 4180 LBS | 4510 LBS |
Accessories
Standard Accessories
- 3-jaw chuck (9″)
- Steady rest
- Follow rest
- 4-position tool post
- Coolant system
- Full-length splash guard
- Worklight
- Chuck cover
- Thread chasing dial
- Toolbox with standard tools
Optional Accessories
- 4-jaw chuck (10″)
- Digital Readout System (View Brochure)
- Royal spindle type live center
- BTC 3-jaw chuck with back plate
- Taper turning attachment
- Rustlick coolant
- Micro carriage stop
- Face plate (12″ D1-6)
