KTM-3VSF CNC w/ MillPwr
Features
- 3 HP variable speed head
- 60-550-4500 spindle RPM
- AC-Freq inverter head (single-phase or 3-phase capable, large digital spindle rpm display with real-time load meter)
- Automatic centralized lubrication system with metered check-valves
- Hardened and Ground (Hrc-52) table surface and all slide ways
- Easy conversational programming, DRO-mode allows for full manual operations with built-in 3 axis absolute encoder glass scales
- Engraving feature and DXF file import capability, USB drive and 12.1” high resolution flat panel color LCD displa
Specifications
| Specification | KTM-3VSF CNC w/ MillPwr | KTM-3VKF CNC w/ MillPwr | KTM-4VKF-E CNC w/ MillPwr |
|---|---|---|---|
| Table Size | 9" x 49" (Opt. 9" x 42") | 10" x 50" (Opt. 10" x 54") | 12" x 50" |
| Table Travel (X-Axis) | 31" (Opt. 24" / 28") | 32" | 30" |
| Saddle Travel (Y-Axis) | 11" | 14" | 17" |
| Knee Travel (Z-Axis) | 15" | 15" | 17.25" |
| Quill Travel | 4" | 4" | 4" |
| Ram Travel | 14.5" | 22" | 22" |
| Spindle Motor | 3 HP | 3 HP | 3 HP |
| Spindle Speed | AC Frequency Drive Head 60-550-4500 RPM | AC Frequency Drive Head 60-550-4500 RPM | AC Frequency Drive Head 60-550-4500 RPM |
| Spindle Taper | R-8 | R-8 | R-8 |
| Quill Diameter | 3.375" | 3.375" | 3.375" |
| Quill Feed Rate | 0.0015" / 0.003" / 0.006" in/rev | 0.0015" / 0.003" / 0.006" in/rev | 0.0015" / 0.003" / 0.006" in/rev |
| Drilling Capacity (Manual / Power) | 0.75" / 0.37" diameter | 0.75" / 0.37" diameter | 0.75" / 0.37" diameter |
| Boring Capacity | 6" diameter | 6" diameter | 6" diameter |
| Milling Capacity | 2.0 in³/min | 2.0 in³/min | 2.0 in³/min |
| Maximum Work Load (Center) | 850 lbs | 850 lbs | 850 lbs |
| Spindle Center to Column | 5" - 19.5" | 5" - 27" | 5" - 27" |
| Net Weight | 2500 lbs | 3100 lbs | 3400 lbs |
| Gross Weight | 2800 lbs | 3300 lbs | 3600 lbs |
| Shipping Dimensions | 72" x 72" (skid) | 72" x 72" (skid) | 72" x 72" (skid) |
| Power Requirements | 220v, 3 phase, 60 Hz, 10 Amp (optional 440v power requires 5A) but can also accept 220v, 1-phase power (15A) without a phase converter, ideal for customers with only 1-phase power | 220v, 3 phase, 60 Hz, 10 Amp (optional 440v power requires 5A) but can also accept 220v, 1-phase power (15A) without a phase converter, ideal for customers with only 1-phase power | 220V 3-phase or 1-phase for machine, 10A (15A for 1-phase); Optional 440V requires 3-phase, 7.5A 110V dedicated for CNC control, 20A |
Accessories
Optional Accessories
- Knee (Z-Axis) Power Feed
- Air Power Drawbar
- Flood Coolant System
- Chip Pan
- Riser Block
- Angle-Lock Vise
- Rustlick Coolant
