TRD-920A
Features
- 6 spindle speed and 3 feed rates
- Centralized single level control for forward and reversal of spindle
- Ultra low noise
- Light and handy to operate
- Safety overload
- Auxiliary dial for spindle feed depth
- With standard accessories
Specifications
Specification | TRD-720A | TRD-920A | TRD-1230H |
---|---|---|---|
Maximum Drilling Diameter (Castings/Steel) | 1.97″ / 1.25″ | 1.97″ / 1.25″ | 2.16″ / 1.65″ |
Distance Between Spindle Axis and Column (max/min) | 29.5″ / 8.7″ | 37.4″ / 8.7″ | 46″ / 13.4″ |
Distance Between Spindle End and Working Surface of Base Plate (max/min) | 41.7″ / 10.2″ | 47.6″ / 13.8″ | 53.9″ / 19.3″ |
Spindle Taper | M.T. 4 | M.T. 4 | M.T. 4 |
Range of Spindle Speed | 88, 154, 282, 455, 796, 1500 RPM (6 Steps) | 88, 154, 282, 455, 796, 1500 RPM (6 Steps) | 44-1500 RPM (12 steps) |
Range of Spindle Feed Speed | 0.002″, 0.0035″, 0.0059″/Rev. (3 Steps) | 0.002″, 0.0035″, 0.0059″/Rev. (3 Steps) | 0.002″, 0.0035″, 0.0059″/Rev. (3 Steps) |
Diameter of Outer Column | 8.26″ | 8.26″ | 11.8″ |
Length of Arm | 32” | 39.7” | 48” |
Table Size | 24″ x 17.5″ x 15″ | 24″ x 17.5″ x 15″ | 25” X 20.5” X 16.3” |
Spindle Motor | 2 HP | 2 HP | 3 HP (2 speed motor) |
Net Weight | 2530 LBS | 2750 LBS | 4620 LBS |
Gross Weight | 2680 LBS | 3080 LBS | 5060 LBS |
Accessories
Standard Accessories
- Work table
- Tool releasing wrench
- Drift
- Reducing sleeve
- Coolant system
- Work light
Brochures
Title: Kent USA TRD Radial Drill